LS212 Ultrasonic Thickness Gauge

Product Description

Ultrasonic double crystal probe

The gauge probe employs a double crystal transducer consisted of two independent crystals separated by an acoustic barrier. One crystal sends ultrasonic pulses, and another is responsible for receiving them. The probe is highly sensitive and can effectively reduce clutter, and the probe housing is made of stainless steel, which is hard and durable

Automatic Gain switchable

Some materials are good conductors of sound and some are not. For the latter, the meter can switch the Gain freely which is to amplify the ultrasonic signal so that the emitted pulse is accurately captured by the transducer as it propagates, and obtains accurate data

Excellent Timer chips provide fast, accurate readings

LS212 ultrasonic thickness gauge calculates the material thickness by sound velocity and the time taken between the emitted pulse and the detected echo, a precision timing chip can bring the user the accurate time to get the accurate data

High precision, high resolution

The accuracy of the tester can reach less than or more than 0.05mm to ensure that it can pass the Chinese national authoritative metrology institute testing. And when testing the thickness of 0.8mm-10mm material, its resolution is 0.001mm

Various materials can be measured

The gauge is used to measure the thickness of metallic materials (steel, iron, aluminum, copper), non-metallic objects (ceramics, plastics and glass) and any other ultrasonic good conductors, where the other surface of the material must be parallel or coaxial to the measured surface during the test

Provide sound velocity of multiple materials

LS212 already contains the velocities of several common metallic (such as iron, copper, aluminum) and non-metallic materials (plastics, ceramics, plexiglass) as well as other objects and the user are not required to find them separately

Sound velocity can be measured with the thickness in turn

The tester can reverse the sound velocity of the material based on the known thickness and measurement results. And the instrument can test irregular materials of the same components as the materail whose thickness can be measured

QC Mode and Statistics Mode

LS212 ultrasonic thickness gage sets up two measurement mode: QC mode and statistics mode

The former is allowed to set upper and lower limits to check the problem areas by prompting NG or PASS. It will count maximum, minimum and average values of data in statistics mode

Comfortable grip with non-slip silicone keys

LS212 ultrasonic thickness gauge housed in ABS plastic shell with non-slip silicone keys, has a comfortable grip and easy to operate

Large LCD Screen

LCD Screen offers users relaxing reading experience even in the backlit environment